Clean production scrap,from factory to recycler
Sourced in the Baltics and Central Europe. Sorted, documented and shipped in full truckloads across the EU
What we buy
Nine streams.One rule: clean and single grade
Production reject and offcuts straight from the line. No labels, no mixed polymers, no contamination. That is what keeps the price high on both sides

Regrind is worth what its weakest fraction is worth. One polymer, one colour, no foreign material

Every lot is weighed and photographed before loading, so both sides see exactly the same material
- 01 — PP
Injection sprues, reject, cups and lids
Natural, white or coloured, unprinted. Thin-wall packaging and closures are the best grade
- 02 — PE
LDPE film, HDPE regrind and pipe offcuts
Film reject and edge trim. Bottles, canisters, crates, caps, pipe-grade offcuts and start-up lumps
- 03 — PET
Preforms, PET-A trays and blisters
Start-up and off-spec reject. Clear PET-A thermoforming skeletons, sheet trim and regrind
- 04 — PS
Cups, sheet skeletons and plates
Thermoforming waste after die-cutting and injection scrap, GPPS and HIPS, single grade, unprinted
- 05 — ABS
Sheet and injection scrap
Sheet offcuts, sprues and reject parts, sorted by colour or mixed. Raw or regrind
- 06 — PVC
Rigid profile offcuts
Window profile offcuts and reject without steel. With or without gaskets, white and laminated separately
- 07 — PMMA
Sheet offcuts and light guide plates
Extruded and cast sheet, clear, opal or coloured, and light guide plates from LCD screens
- 08 — PA · PC · PBT
Technical plastics
PA6, PA66, PA12, PC, PBT and POM: sprues, reject parts and regrind, one grade per lot
- 09 — EPS · XPS
Foams
Clean EPS in briquettes or loose, XPS offcuts and regrind from production
Acceptance rules
What we take, what we skip,how to pack
Simple rules keep the price high and the pickup fast. When in doubt, send a photo and we will tell you


- One polymer, one grade per big bag
- Dry, no food residue, no oil, no metal
- Unprinted preferred, printed only if agreed
- Colour sorted: natural, white and coloured separately
- Mixed polymers and household plastics
- Packaging with hazardous chemical residues (EWC 15 01 10*)
- Multilayer and laminated films
- Wet, dirty or mouldy material
- Big bags of about 1 m³, one material per bag, labelled
- Film on reels or pallets, wrapped
- Octabins or pallets for regrind and granulate
- Full truckloads, a first test lot can be smaller
Material by material
Nine streams,nine clear specs
What we take and what we skip in every stream, and how it should be packed

Wanted now
Updated 28 October 2026What our buyers take right now
Demand we have today from recyclers and compounders. If your factory has one of these streams, the buyer is already waiting

Prices depend on grade, colour, print and volume. Send photos and we quote within one working day
Send photosAvailable now
Lots ready for recyclers
Material we can load now or every month. Photos are of the actual lot. Prices per tonne on request, delivered to your plant or EXW

PMMA light guide plates
- Specification
- Clear plates from LCD screens, whole, stacked on pallets
- Quantity
- About 50 t, more every month

PMMA sheet offcuts
- Specification
- Opal, clear and coloured, extruded and cast, with protective film
- Quantity
- About 30 t, then 20 to 40 t a month

HDPE and PP regrind from pallets, black
- Specification
- Injection grades. HDPE MFR 3.5 to 5.5 (190 °C/2.16 kg), PP MFR 5 to 9 (230 °C/2.16 kg). Dry, dedusted, metal free
- Quantity
- HDPE about 19 t, PP about 13 t, in big bags

HDPE regrind from trays, grey
- Specification
- Extrusion grade, MFR about 1.5 (190 °C/5 kg). Dry, dedusted, metal free
- Quantity
- About 16 t in big bags

HDPE regrind with EVOH
- Specification
- From fuel tank production, post-industrial, black and natural
- Quantity
- About 100 t a month

HDPE regrind from bottle caps
- Specification
- Unused caps from production, no labels, mixed colours, 2 to 8 mm
- Quantity
- 40 to 60 t a month, big bags of about 840 kg

ABS, mixed colours
- Specification
- Sprues, pellets and regrind from toy production
- Quantity
- About 11 t

PET preforms and lumps
- Specification
- Start-up and off-spec reject, clear and coloured, lumps separately
- Quantity
- About 40 t, then about one truck a month

LDPE film shred, natural
- Specification
- Production film, shredded, 1 to 5 % coloured
- Quantity
- About 10 t a month, big bags
Lots move fast. If you need something that is not listed, tell us the grade and volume and we will look for it
Photos and quantity
The factory sends 2–3 photos and an approximate monthly volume. We answer within one working day
Offer and sample
We confirm the indicative price. For a new stream the recycler tests a sample of 0.2 to 2 kg and checks MFR and colour, so the price is fixed before loading
Contract and documents
We prepare the contract and the documents for the route: a by-product declaration where the law allows it, otherwise waste documents with Annex VII
Packing and pickup
Packing is agreed before the first pickup. We book the truck for each lot, and every lot is weighed and marked
Delivery and payment
Full truck to the recycler with photos, MFR and paperwork. The factory is paid against invoice
Logistics
We book the truck.You only load
Pickup in the Baltics, Poland and Central Europe, delivery to recyclers across the EU. One contact, one contract, transport organised by us


Coverage
Lithuania, Latvia, Estonia and Poland, other EU countries by agreement
Lot size
Full truckloads of 20 to 24 t. A first test lot can be smaller, so you can check us without risk
Transport
Partner carriers with tilt trailers or walking floor, booked for each lot. Loading by forklift or ramp
Packing
Big bags, octabins or pallets, the way you already pack. Agreed with you before the first pickup
Weighing
Every lot is weighed on a weighbridge. The net weight from the ticket goes on the invoice, no estimates
Delivery to recyclers
DAP the recycler's plant in the EU, or EXW. Photos of the lot before loading, documents with the truck
Two sides, one lot
Factories sell. Recyclers buy.We carry the lot between them
The same material passport travels with every delivery, so both sides see exactly what is in the truck

If you pay for removal today, we can most likely offer better
- Transport booked and paid by us
- Pickup on a schedule that suits production
- Payment against invoice
- Contract and documents prepared by us
Full truckloads of sorted material with the documents your compliance needs
- Single polymer, single grade per truck
- Photos and MFR with test conditions per lot
- DAP your plant or EXW
- Annex VII where material ships as waste
- Materialsingle polymer, single grade
- Photosof the lot, before loading
- MFRwith test conditions, checked on your sample
- Weightnet, weighbridge ticket
- Documentsinvoice, CMR, Annex VII or declaration
Legal route
By-product where the law allows it.Waste route where it does not
Clean residues of a factory's own production can move as a by-product where national law allows it, in Lithuania under order D1-46/4-63. Everything else moves as waste, with the documents the route requires

By-product
Residues of your own process with a known further use
- Producer signs a conformity declaration, in Lithuania Annex 3 of the order
- No waste consignment note, no waste-handler registration
- Confirmed to us in writing by the Lithuanian Environmental Protection Agency, 21 September 2026, reg. A3-7039
Waste route
Packaging, tare, used film and material bought from third parties
- Annex VII for every cross-border shipment of green-listed plastics, Regulation (EU) 2024/1157
- Polish BDO registration filed, SENT for transport into Poland
- GPAIS consignment notes for waste from Lithuania
FAQ
Questions we hear most
Short answers. If yours is not here, write to us
For factories
We do. Our price is at your gate, the truck is booked and paid by us
Against invoice after weighing, on the terms fixed in the contract. Every pickup comes with a weighbridge ticket, so there are no disputes about quantity
Compare the price on the same material by photo. No obligation, no minimum period, you can start with one stream and keep the rest as it is
Any deviation is agreed before loading, never after. If a bag does not match, it stays with you, we do not deduct afterwards
Usually not. Clean residues of your own process can go as a by-product with a declaration we prepare, where the law allows it. Packaging, tare and used film go as waste, and we handle those documents too
From public sources: company and waste-handler registers, trade boards and industry directories. If you prefer not to hear from us, reply once and we will remove you
For recyclers
Polimalt is a Polish company registered in Warsaw, EU VAT PL7011334205, valid in VIES. Our team works from Vilnius. We trade material of EU origin, so no customs duties apply within the EU
A full truck of 20–24 t of one polymer. Smaller loads of two streams by agreement
Yes. 0.2 to 2 kg by courier before the first truck, with photos and MFR with test conditions
DAP your plant or EXW. Prices quoted per tonne for the agreed grade
As agreed in the contract: on delivery or within an agreed number of days after unloading for first lots, longer terms for regular volumes
Invoice, CMR, weighbridge ticket and Annex VII when material travels as waste, or the producer's by-product declaration
About Polimalt
A trading company for clean production scrap, built one lot at a time
Polimalt gives factories a better outlet for clean production scrap than the local waste contractor, and gives recyclers a reliable supply with proper paperwork. The company is registered in Poland and the team works from Vilnius. We source material in the Baltics and Central Europe and deliver it straight from the source to the recycler. We do not process material ourselves. We source it, document it and move it

- CompanyArtem Chulkov Polimalt (sole proprietorship, Poland)
- NIP · REGON7011334205 · 545855171
- VAT EUPL7011334205, valid in VIES
- OfficesWarsaw (registered) · Vilnius (team)
- FoundersDanil Vologzhanin, Artem Chulkov
- ActivityTrade in post-industrial plastic scrap
- SourcesFactories and recyclers in the Baltics and Central Europe
- BuyersRecyclers and compounders across the EU
- ShipmentsAnnex VII, Regulation (EU) 2024/1157 · BDO registration filed
- Contact[email protected] · WhatsApp +48 504 678 694
Contact
Selling scrap or buying material?Write to us
To sell, two or three photos and a rough monthly quantity are enough. To buy, tell us the grade, volume and delivery place. We reply within one working day, in English, German, Polish or Lithuanian
- Polish company, team in Vilnius
- VAT EU PL7011334205, valid in VIES
- Shipments with Annex VII